This gearbox utilizes a 30:1 ratio worm-drive reduction for applications that want extremely slow and smooth rotational motion. The worm-drive design not merely minimizes backlash but also eliminates back-traveling the gearmotor so a posture can be held even when power is not applied. The precision ground 3/8” stainless steel result shaft is backed by dual 3/8” ABEC 5 ball bearings to aid a load from any orientation. The ¼” ABS plastic and aluminum structure provides a rigid framework without adding unnecessary weight and can be easily installed to any flat surface by utilizing the base mounting tabs. Our Regular Spur Gear motors will work with this gearbox (engine offered separately). The Vertical Shaft Worm-Drive Gearbox is perfect for turn-tables, time-lapse systems and low-quickness applications that require high precision and torque.
Motor RPM required = 1 / (minutes per rotation desired / 30)
Example: 1 / (10 minutes per rotation / 30) = 3 RPM motor needed to achieve ten minutes per rotation (in max speed)
Dimensions 3.43″ x 1.93″
Item Weight 5.9oz (0.375 lbs)
Output Shaft Diameter 3/8″ (0.375″)
Motor Size Compatibility Standard Spur Gear Motors
Ever-Power gives you the widest selection of standard, non regular and customised worm gearbox and worm gear motor.
Ever-Power maintains the highest degree of standard in manufacturing of worm gears in gearboxes. From the look of gearbox, material selection to production practice of worm equipment box and gear engine.
Models: 30, 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430
Ratio : 5/1 to 4900/1
Middle Distances : 40 mm to 400 mm
Single stage / Double stage
Small Worm Gearbox Versions like C.D. 50, 60, 75, 85, 100 mm and Ratio 30/1 or 40/1 are usually available in stock or could be made on short notice by customer.
Worm gearboxes are experiencing cast iron equipment case, worm shaft is of Alloy Steel, duly hardened and tempered. The worm wheel is made from Chill Cast Phosphorous Bronze.
Ever-Power worm equipment boxes have liberal ribbing for increasing temperature dissipation area, streamlined sump to carry more oil and enthusiast of ample size which is effective in both aspect of rotation.
Design Standards:
Wherever applicable, British as well as Indian Design standards are used. Worm Shafts comply with case- hardening Alloy Steels, Worm Wheels conform to phosphorous-bronze as per BS 1400, While Equipment case conforms to C.I. Grade 20, IS210.
High reduction gear
Worm and wheel equipment pairings provide large rate reduction ratios with only 1 equipment pairing in a more compact space in comparison to other types of gears. You can expect up to a maximum ratio of 100:1 with this products. Another advantage of the Worm and Wheel equipment pairings is the low level sound they produce. Some drawbacks will be the general low effectiveness and the fact that they generate warmth.
Advantage of EP’s Worm Gears – “Chilly rolled Worm Gears”
1) The hardness of the helicoid surface has been attained by work hardening when the cold rolling was performed, providing Worm gears with better mechanical properties than machined worms because of reality that the metallic fibrous framework has not been cut.
2) The surface hardness after chilly rolling is increased by 1.2 to 1 1.3 times in comparison to the hardness of the original materials, and the hardness of the helicoid surface area increases to around HB240 to 260.
3) Cold rolled worms are suitable for miniature equipment applications since this can be rotated smoothly without damaging the worm wheels made out of POM or additional soft materials.
4) Due to the implementation of this cold rolling method, the helicoid surface area of EP-Worm (M0.5 to 2.0) comes away with a mirror like finish. Thus, EP-Precision Cool Rolled Worms give a smooth operation and long-term durability.
Worm gears are constructed of a worm and a equipment (sometimes referred to as a worm wheel), with nonparallel, non-intersecting shafts oriented 90 degrees to each other. The worm is usually analogous to a screw with a V-type thread, and the apparatus is usually analogous to a spur equipment. The worm is typically the traveling component, with the worm’s thread advancing one’s teeth of the gear.
Such as a ball screw, the worm in a worm gear might have a single start or multiple starts – and therefore there are multiple threads, or helicies, on the worm. For a single-start worm, each complete switch (360 degrees) of the worm increases the gear by one tooth. So a gear with 24 teeth provides a gear reduced amount of 24:1. For a multi-start worm, the apparatus reduction equals the amount of teeth on the gear, divided by the amount of begins on the worm. (This is different from most other types of gears, where the gear reduction is definitely a function of the diameters of the two components.)
The meshing of the worm and the gear is a mixture of sliding and rolling actions, but sliding contact dominates at high reduction ratios. This sliding actions causes friction and warmth, which limits the efficiency of worm gears to 30 to 50 worm wheel gearbox percent. To be able to minimize friction (and therefore, warmth), the worm and gear are constructed with dissimilar metals – for example, the worm could be made of hardened metal and the gear manufactured from bronze or aluminum.
Although the sliding contact reduces efficiency, it provides extremely quiet operation. (The utilization of dissimilar metals for the worm and gear also plays a part in quiet procedure.) This makes worm gears suitable for use where noise should be minimized, such as in elevators. In addition, the use of a softer materials for the gear means that it could absorb shock loads, like those experienced in large equipment or crushing machines.
The primary benefit of worm gears is their capability to provide high reduction ratios and correspondingly high torque multiplication. They can also be used as velocity reducers in low- to medium-swiftness applications. And, because their decrease ratio is based on the amount of gear teeth by itself, they are more compact than other styles of gears. Like fine-pitch lead screws, worm gears are usually self-locking, making them well suited for hoisting and lifting applications.
Worms & Worm Gears
EP Gear’s worms and worm gears provide a highly effective answer for power transmission applications requiring high-ratio acceleration reduction in a limited space using correct angle (90°), non-intersecting shafts. When properly used, worms and worm gears supply the smoothest, quietest form of gearing.
Because the effectiveness of a worm gear drive depends upon the business lead angle and amount of begins on the worm – and because increased performance is always an objective, the ratio should be kept only possible. To run properly, worms and worm gears utilized together must have the same diametral pitch and threads.
Our complete type of worms and worm gears could be ordered through the EP Equipment Guaranteed Same Day time Shipment Program for the quickest delivery possible.
Product Features
90°, non-intersecting shaft applications solution highly specialized power transmitting needs.
Our worm gears provide smoothest, quietest form of gearing.
They 
offer high-ratio speed decrease in minimal spaces.
Their efficiency is easily increased by reducing ratios.
With some ratios, there is resistance to back driving.
Offered from 48 DP to 3 DP
Stocked as single, dual and quad start configurations
How exactly to Select High Efficient Worm Gearbox?
The worm gear manufacturing process can be relatively simple. However, there is a low transmission performance problem in the event that you don’t understand the how to select the worm gearbox. 3 basic indicate choose high worm gear efficiency that you ought to know:
1) Helix position. The worm equipment drive efficiency mostly rely on the helix position of the worm. Usually, multiple thread worms and gears can be more efficient than single thread worms. Proper thread worms can increase effectiveness.
2) Lubrication. To choose a brand lubricating essential oil can be an essential factor to boost worm gearbox efficiency. As the proper lubrication can reduce worm equipment action friction and temperature.
3) Material selection and Gear Manufacturing Technology. For worm shaft, the material ought to be hardened steel. The worm gear materials should be aluminium bronze. By reducing the worm gear hardness, the friction on the worm the teeth is reduced. In worm manufacturing, to use the specialized machine for gear cutting and tooth grinding of worms can also increase worm gearbox performance.
From a sizable transmission gearbox power to a straight small worm gearbox load, you can choose one from an array of worm reducer that precisely matches your application requirements.
Worm Gear Box Assembly：
1) You can complete the set up in six different ways.
2) The installation should be solid and reliable.
3) Be sure to check the connection between your electric motor and the worm gear reducer.
4) You must make use of flexible cables and wiring for a manual set up.
With the help of the most advanced science and drive technology, we’ve developed several unique “square box” designed from high-quality aluminium die casting with a lovely appearance. The modular worm gearbox style series: worm drive gearbox, parallel shaft gearbox, bevel helical gearbox, spiral bevel gearbox, coaxial gearbox, right angle gearbox. An NMRV series gearbox is definitely a typical worm gearbox with a bronze worm gear and a worm. Our Helical gearbox products comprises of four universal series (R/S/K/F) and a step-less swiftness variation UDL series. Their framework and function are similar to an NMRV worm gearbox.
In the EP worm gears, the output shaft is offset by 90° from the drive shaft. A dual shaft for double-sided output or a cover for the brief shaft end are optionally available as accessories. EP gearboxes have a high-quality, long-term synthetic lubricant on the basis of polyethylene glycol, and so are consequently maintenancefree. They are characterized by high effectiveness and self-locking.
Please note:
Because of their relatively high backlash (~1-2°), worm gears are not ideal for positioning applications.
Worm Gear applications
Software of worm gears, which is comparable to a standard spur and the worm, which really is a cylindrical gear that resembles a screw, permits smaller gearboxes or planetary drives, while retaining torque or power. It’s quite common for worm gears to possess reductions of 20:1, and also up to 300:1 or greater.
Normal gearing includes the unique capability which additional gearing components do not have – the “worm” can effortlessly spin the part, but the “gears” are not able to maneuver and fully rotate the worm-zone.
What’s the real reason for this inability to rotate the gear-worm?
The angle is not deep enough on the worm, so when the gear attempts to rotate the worm, high frictional pressure between worm shaft and gear parts keep carefully the zone stuck constantly in place.
Focused on excellence, our employees have the most important priority satisfying your gear building needs and product improvement.
Also, we consider pride in our equipment; few producers have the gear to engineer metal parts as precise as we do. Actually fewer manufacturing companies have the machining gear to check on the tolerances we can hold.
Being a gearing manufacturer to Automotive level companies, with a diverse way to obtain material types, allow all of us to achieve the most challenging task requirements. The mixture of robust materials, advanced manufacturer technology, reliability and our dedication to client satisfaction makes us a top provider in advanced gearing and shafting products.
Our gear manufacturing locations have over twenty years of worm gear style expertise, gained through many tasks that included varied sizes of customized worm gears to print requirements.