TF Kind Flanges
Model TF flanges are created from the exact same high-strength cast iron as the S flanges, but are intended to accommodate the international typical Taper Lock bushing for simple set up and removal
TF Variety flanges let for mounting the bushing about the front (hub) side of the flange
TF flanges can be found in sizes 6 by 16 and can be used with any style of sleeve as pictured on web page SF-5
TR Style Flanges
TR flanges are similar to the TF fashion, but let to the Taper Lock Bushing to be mounted and removed from
the reverse or serration side of your 
flange
The constrained torque ratings from the Taper Lock Bushings enable TR flanges to only be utilized with EPDM or Neoprene sleeves
Distinctive bushing sizes are applied, so they’ve got unique greatest bores compared to the TF flanges
Sizes six as a result of 16 can be found
Taper-Lock Bushings
The marketplace conventional taper lock bushing is often a split style and design enabling a compression fit with the flange towards the shaft with out set screws
The very simple layout makes the set up and elimination easy whilst the 8° taper grips tight and presents fantastic concentricity
A Lowered degree of inventory may be accomplished due to the many other power transmission elements that use Taper Lock Bushings which include: sheaves, sprockets, and pulleys
does not give the Taper-Lock Bushings themselves as they’re broadly available from other manufacturers
