Highest dress in resistance accessible by sealing grease involving pins and bushings
The durability of chain is dramatically enhanced due to the fact grease is sealed between the pins and bushings by O-rings. The O-ring chain is definitely the most reliable model of the Ultimate Daily life Chain Series with its fantastic put on resistance even inside the disorders or environments exactly where chain upkeep is complicated.
Advisable employs.
?Situations the place frequent chain substitute is needed resulting from wear stretch
?Circumstances in which lubrication through the services is not possible
?In an surroundings with considerably soil, sand, dust, and so forth.
?Applications that call for strength greater than that of the sintered bushing roller chain
Other capabilities
?Minimizing noise. (The noise level is three dB decrease compared to typical roller chains.)
?Lowering vibration using the friction made by O-Ring. (The power loss due to the friction is almost negligible, because the frictional force involving the pins and bushings is for ordinarily while in the applications.)
Variety of chains
The power of an O-ring chain is almost the same as that of a standard roller chain. (Because the pins are longer than people of typical roller chain, the typical rupture strength is slightly reduce.)
For selecting a suitable chain, refer to “Selection of Chains” .
When the services ambient temperature is increased than 80° C, unique heat resistant O-rings needs to be applied. In this case, speak to us for far more info.
Connecting back links and offset links
Two sorts of connecting back links are available: clearance match and interference fit. When high strength or durability is needed, use interference-fit connecting link. Only 2POJ is obtainable because the offset hyperlink for all sizes.
Sprockets
O-ring chain makes use of longer pins 
than a standard roller chain. When utilizing multiplex O-ring chain, the typical sprocket for multiplex chains cannot be utilised.
Caution
O-ring chain is not recommended in applications in which solvents or other substances may possibly attack “Nitric Rubber”. Specific materials O-rings may also be readily available for these circumstances: Please seek advice from us for specifics. Normally, “Nitric Rubber” is broken by get hold of with the following chemical supplies.
