Please follow the alternative instructions given the alternative locks for proper assembly. Make sure to advise proper lock assembly variant/lettered pair required to ensure proper fit.
The Lock Assembly china ignition lock assembly on your own car is made up of two separate parts; the lock cylinder, which – in cars made after about 2000 — runs on the passkey to help stop theft, and an electrical part called the ignition switch that passes power to devices such as wipers, electric home windows, door locks and the air. The ignition switch as well sends power to the starter motor when you switch the main element. The ignition lock can be where you insert the key to start the car and locks the steering wheel until the important is inserted and considered the “on” posture. The steering wheel can’t be rotated without the key in the “on” position, which means a thief cannot travel off with the car simply by hot-wiring it. If the ignition lock assembly — either portion — breaks, it signifies that you won’t have the ability to drive the automobile until it’s repaired. The ignition lock itself can’t be repaired and should be replaced, usually by a mechanic with the proper tools and know-how. If the electrical section of the assembly breaks, you’ll be able to replace it generally in most vehicles without disturbing the ignition lock. A broken ignition lock assembly can arrive in a number of ways. You may observe that it’s getting harder to turn the key to start the 
car – almost just like the crucial doesn’t fit anymore. Sometimes the tyre jams following the car starts and you have problem moving it. The problems could be intermittent as the assembly fails, which signifies that sometimes the car will start without a problem and other circumstances the engine won’t start or may keep running even once you turn off the key. Because a cracked or failing ignition lock assembly is quite annoying and can make your vehicle unreliable, you will most probably want to take it to your mechanic for diagnosis and restore once you notice the problem.
Normally you will reuse the old lock rung from the old lock assemblies. On the other hand, if damaged, you need to also order an upgraded rung.
Replacement lock assemblies can be purchased in pairs only and include instructions and all installation fasteners.