Single and dual reduction planetary equipment drives to be used with electric, hydraulic, air flow motors or mechanical power input from high rate, low torque sources to provide reduced speeds at increased torques. The input side has standard SAE pads for electric motor mounting. Available in the three output configurations demonstrated below. Many units can be furnished with an intrinsic parking brake.
Solitary reduction drives are hydraulic planetary drive limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input swiftness is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Products provide 95% power tranny efficiency.

Wheel Drive
Input side has regular SAE pads and splined insight. Output part has hub for installation vehicle wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature can be regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined input. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined input. Output side includes a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel provides extra-large tapered roller bearings, a ductile iron hub and warmth treated ring equipment to reduce backlash growth caused by wear. The exterior bearing nut provides the ultimate in shaft retention and shaft power. Output can be a spindle shaft or various sizes of essential pinion gears.