The EP Greenhouse gear motor is a concise and lightweight reduction gear driver with a limit switch system that is ideal for assembly of a locally available electric electric motor. The gear driver is used in manually-managed or climate-managed ventilation and display systems in greenhouses. The quick and easy-to-install EP gear motor is certainly rainproof and windproof. The gear motor includes a high protection course (IP65) and can be used within an ambient temperature of 0-60 °C.
The low-noise gearbox for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmitting means that the drive shaft can be locked when the reduction gear driver is not running. The completely sealed reduction gear motor has an expansion chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all circumstances, even at high temps. Thanks to the use of an growth chamber, the gear reducer can be installed in any position. There are no limitations, because there is no dependence on a bleed plug. The sealed reduction gear motor keeps the apparatus oil of the geared motor in optimal condition for its entire operating life time. The reducer is ideal for discontinuous use, operating course s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction gear driver has an FT85 motor assembly flange, on to which the right IEC standard motor can simply be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed within an included chamber and is usually enclosed by an impact-resistant plastic-type material cover. The limit switch system is accessible and easy to adjust. The limit change system’s maximum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The geared motor comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear reducer for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperature ranges of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 moments.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).