China Vtp Vertical Turbine 16 Meter Long Shaft Pump for Irrigation Project axle shaft collar

Merchandise Description

• Why decide on us?
• Specialized creation Manufactory for Vertical Turbine Pump
• Target on technological innovation, Above Industry leading stage
• Good knowledge at Domestic and oversea industry
• Very carefully paint  for Good appearance
• Several years of Global provider standards, Engineer one-to-1 services

Solution Description

Vertical Turbine Pump

Lengthy Shaft Vertical Turbine Sea Water Market Town Flood Control Drainage Pump
This sort of  vertical drainage pump is largely utilized for pumping no corrosion, temperature considerably less than sixty °C, suspended solids (not like fiber, the grits) considerably less than a hundred and fifty mg/L material of the sewage or waste water.
VTP kind vertical drainage pump is in VTP kind vertical drinking water pumps, and on the foundation of the boost and the collar, established the tube oil lubrication is water. Can smoke temperature beneath 60 °C, ship to have a certain strong CZPT (this kind of as scrap iron and fantastic sand, coal, and so forth.) of sewage or waste drinking water.

Merchandise Parameters

TKFLO Vertical Turbine pumps served for CZPT desalination project, H2o supply project industry plant and municipal administration in Australian. This Project is for the irrigation and the size of pumps reaches to sixteen meter. In this kind of a prolonged size, still outstanding to satisfy the sleek procedure of pump, calls for a large amount of technologies. Pump sort: Vertical turbine pump Ability: 3125m3/h  Head: 25meter Pump size from the foundation plate to the strainer: sixteen meter Use for Irrigation venture in Australian.
 

How It Functions:

 The vertical turbine pump is usually pushed by an AC electric induction motor or a diesel motor by way of a right angle drive. The conclude of the pump is composed of a rotating impeller that is joined to a shaft and guides the effectively h2o into a diffuser casing known as a bowl.

 Pumps with multi-phase preparations use numerous impellers on a single shaft to generate higher force that would be required for pumping water from further wells or where increased stress (head) is needed at ground stage.

 A vertical turbine pump works when water arrives by way of the pump from the bottom by way of a bell-shaped unit recognized as a suction bell. The drinking water then moves into the 1st stage impeller, which boosts the velocity of the h2o. The drinking water then moves into the diffuser casing immediately above the impeller, where the substantial velocity power is reworked into large strain. The diffuser casing also guides the fluid into the up coming impeller situated immediately earlier mentioned the diffuser casing. The process goes on via all the phases in the pump. 

The VTP pump line is generally designed to run in wells or sumps. Its bowl assembly consists primarily of a suction situation or bell, 1 or more pump bowls and a discharge case. The pump bowl assembly is positioned in the sump or properly at a depth to supply the suitable submergence.
 

Merchandise Benefit

√ Corrosion resistance major element materials, famous brand bearing, thordon bearings appropriate for sea h2o.

√ Exceptional design for large Performance save vitality for you.

√ Adaptable set up strategy suitable for different internet site.

√ Secure managing, Simple to put in and maintain.

1.The inlet shall be vertical downward and the outlet horizontal over or beneath the base.
2.The impeller of pump is labeled into enclosed variety and fifty percent-opening type, and 3 changes: non-adjustable, semi adjustable and total adjustable. It is unneeded to fill the drinking water when the impellers are totally immersed in the pumped liquid.
three.On the foundation o Pump, this type is additionally fit with muff armor tubing and the impellers are made of CZPT resistant materials, widening the applicability of pump.
4.The relationship of impeller shaft, transmission shaft, and motor shaft applies the shaft coupling nuts.
five.It applies drinking water lubricating rubber bearing and packing seal.
6.The motor generally applies regular Y series tri-phase asynchronous motor, or YLB type tri-phase asynchronous motor as requested. When assembling Y type motor, the pump is made with anti- reverse device, efficiently staying away from reverse of pump. 

Far more element about our VTP series Lengthy Shaft Vertical Turbine Pump for curve and dimension and info sheet you should conatct Tongke.

Thorough Images

FAQ

Observe before get
1.The temperature of medium shall not be increased than sixty .
two.The medium shall be neutral and PH price in between 6.5~8.5. If the medium is not steady to the requirements, specify in the purchase list.
three.For VTP type pump, the material of suspended substances in the medium shall be less than a hundred and fifty mg/L  for VTP sort pump, the max. Diameter of strong particles in the medium shall be significantly less than 2 mm and the content material considerably less than 2 g/L.
4 VTP variety pump shall be linked with clean water or soapy h2o exterior to lubricate the rubber bearing. For 2 phase pump, lubricant force shall not be less than operational strain.

Application

Petrochemical Sector pump
Seawater desalination plant or salt water pump
Municipal engineering
City flood manage and drainage
Sector plant
Industrial architecture
Sewage remedy engineering
 

Sample Project

Undertaking NO.1

Project NO.2               VTP pump for sea h2o plant 

Project NO.3         VTP pump for Petrochemical Functions

Project NO.4    

Organization Profile

###

###

###

###

###

###

How to Choose the Right Shaft Collar

A shaft collar is a small, inexpensive machine component that serves a variety of purposes in power transmission. It is most commonly used in gearboxes and motors. It can serve as a mechanical stop, bearing face, or locating component. Its simple design makes it easy to install. Here are some of the most common types and their functions.

Function

Shaft collars are an important part of many mechanical systems. These devices hold mechanical components on a shaft and also help mount shafts on flat surfaces. They are available in many different styles, sizes, and materials. Selecting the right shaft collar is essential in preventing damage to components. Stafford Manufacturing, a leading manufacturer of shaft collars and other related mechanical components, can help you choose the right one for your application.
There are two main types of shaft collars. The first is the Heavy Duty type. It has a larger outer diameter and wider opening. While this may seem to increase holding power, the problem with that is that it can reduce the amount of space the collar has on the shaft. On the other hand, the Thin Line type is similar, but is made with smaller outer diameters. Another type is the Threaded Bore shaft collar. These shaft collars offer exceptional axial holding power, and are designed to protect threaded shafts without causing any damage.
A shaft collar has many uses and is typically used in industrial applications. It can act as a spacer and to stop shaft movement in reciprocating applications. It can also be used to align and position parts of automation machinery.

Types

There are several different types of shaft collars. These components are critical for a variety of applications, and their design plays a large role in the performance of the resulting product. To select the most appropriate collar, designers must consider several factors, including the style, material, bore size, and geometry of the shaft. Many manufacturers provide performance data, and users can contact them for assistance.
There are many different types of shaft collars, which make it important to understand how each one works and what applications they can serve. Fortunately, shaft collars are easy to install and require little maintenance. Whether you need to secure industrial railings or position medical equipment, shaft collars are a versatile component that can be tailored to meet your needs.
One type of shaft collar is the locking collar. This type of shaft collar has a threaded end that is designed to mate with spindle bearings. They offer an increased TIR than standard shaft collars and allow for precise preload control. They also feature slots for spanner wrenches.

Sizes

Shaft collars come in a variety of sizes. You can get a small diameter shaft collar for small equipment, or a large diameter shaft collar for larger equipment. Both styles are made from solid steel, and they come in several thicknesses. You can choose between one-half inch and six-inch collars, depending on your needs.
There are no specific standards for shaft collars, but most manufacturers have similar designs. They’re either single-point faced or double-split, and can be fine or coarse threaded. They’re often used as mechanical stops, bearing faces, or as locating components. Their bore is either fine or coarse, and their outside diameter and width are determined by the shaft diameter.
Shaft collars are commonly found in mechanical and automation equipment. These ring-shaped devices hold motor components, sprockets, and bearings in place. They also allow them to be adjusted and positioned precisely. A shaft collar is often used to connect the end of a shaft to a mechanical stop.
Another type of shaft collar is called a set collar. It has a recessed area for a screw to bite into a shaft. These collars are perfect for holding sprocket hubs, bearings, and spacers. They can also be used as a rigid coupling.

Cost

When choosing a shaft collar, consider its intended application and cost. Some shaft collars are very expensive while others are quite affordable. Choose one that meets the needs of your assembly. If you’re using the shaft collar infrequently, a clamp style or a set screw style may be a better choice. Then, you can easily adjust or disassemble it with just a few tools. If you’re using it more frequently, choose a two-piece shaft collar.
The material of the shaft collar is also an important consideration. Steel and stainless steel are common choices. While both materials are strong and durable, steel tends to have better holding power. However, aluminum shaft collars are lighter and provide better strength-to-weight ratio. The type of material you choose depends on the amount of corrosion protection you need, and whether you’ll need the collar to resist extreme temperatures. If the shaft collar is going to be used in a hot environment, you may want to go with a titanium collar.
There are many different sizes and types of shaft collars. The type of collar you choose depends on the specific application and the system it’ll be used in. Consider the dimensions of your shaft, the material of the shaft, and the length of the shaft to find the right fit. If you’re not sure what size you need, ask a manufacturer for help.

Placement on shaft

In some applications, the placement of the shaft collar can be critical to the overall performance of the machine. The collar’s design must take many factors into account, including material, style, bore size, and shaft geometry. If a user is uncertain of the proper placement of their collar, they should refer to the manufacturer’s website for guidance.
While shaft collars may look simple, they’re actually essential mechanical components that are used in almost every type of machinery. Despite their ubiquitous use in every industry, they are often underappreciated due to their complexity. Many people aren’t aware of their importance or the various types of collars available. This shaft collar guide will provide detailed information to help you find the right shaft collar for your specific application.
The surface treatment of the shaft collar is another important factor that contributes to its holding power. The most common treatment is a black oxide finish. This finish enhances screw torque while preserving the frictional properties of the bore. This finish can be further optimized by applying light oil to the screw. Zinc plating is also a good option for shaft collars. This material offers better corrosion resistance, but can reduce holding power.

Clamp style

A clamp style shaft collar is a simple and effective tool for securing shafts in machine tools. Its two-piece design allows for quick and easy positioning adjustments and has greater holding power than set screw collars. In addition, its friction-based connection maintains ease of use and prevents shaft damage. This type of collar is also more corrosion resistant than set screw collars.
There are several different types of shaft collars, including single and double split collars. Single-piece clamp collars are anchored into the shaft with a single tangential screw, whereas double-piece collars are anchored to the shaft with two socket cap screws. The latter type provides more stability and axial holding power and is suitable for rotating assemblies. A single or double-piece clamp collar can also be threaded to allow for precise positioning along the shaft. Its internal threads also provide enhanced support for high axial loads and act as a positive mechanical stop.
There are different types of shaft collars, each with its own set of advantages and disadvantages. A set-screw collar may be preferred over a clamp-style shaft collar, but it’s not the only choice. A set-screw collar can severely mar the shaft and can prevent fine adjustments. However, it is a good idea to use the torque wrench when tightening a shaft collar.

Zinc plated

Zinc plated shaft collars are available in a variety of sizes. They are precision machined from cold finished steel bar stock and zinc plated for corrosion resistance. They are also very attractive. They are made in the USA. Whether you need a zinc-plated shaft collar for a simple repair or a more complicated installation, Lovejoy has the right solution for your needs.
The CZPT MSP-12-FZ two-piece shaft collar has a 12mm bore, 28mm OD, and 11mm width. Its clamp style design allows you to easily install and remove the shaft collar. It is easily adjustable and is stamped with the CZPT name.

editor by czh 2023-01-25