We In addition, WE CAN Make Tailored VARIATORS, GEARED MOTORS, Electric MOTORS AND OTHER HYDRAULIC Merchandise According TO CUSTOMERS’ DRAWINGS.- EPG Group the largest agricultural gearbox and pto factory in China with 5 various branches. For a lot more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
Item Description:
60hp China maker 60hp four wheel drive farming 4×4 tractors for agriculture
This design 60hp 4 wheel drive tractor sells extremely ept for its very good high quality and low-cost cost.
We export this product tractors most to Europe, The united states, Australia and Brizil and other countries, they are very popular in the market.
With beautiful appearance, this tractor is also multi-useful. It can match all sorts of farming implements.
Photos:
Standard Equipments:
QC4102 Engine,4 Cylinders,twelve+twelve Gear Shift,With Dual-Stage Clutch,Energy Steering,Trailer outlet,
security plate,Tires:8.3-twenty/twelve.4-28,hand throttle wire ,4×4 Wheel Travel,3-Stage Linkage,
Rear PTO 540/760, Coloration comply with your need to have.
Possibilities:
Cab,Canopy,Multi-Way Valve,Air Brake,Front Ballast,Rear Ballast,Tilting Attract Bar,
60hp 4 wheel drive Tractor Specs
| Product | CP604 | ||||
| Dimensions of Tracto 540 to one thousand pto gearbox Thrissur India r(mm) | Length | 3900 | |||
| Width | 1800 | ||||
| Height (to the exhaust vent) | 2160 | ||||
| Tread | Front Wheel | 1300 | |||
| Rear Wheel | 1300 | ||||
| Axle Base | 1760 | ||||
| Min.Floor Clearance | 360 | ||||
| Structure fat (kg) | 2580Kg | ||||
| Motor | Model | QC4102 | |||
| Type | Vertical,4-Cylinder,H2o Cooled and 4-stroke | ||||
| Rated Electricity(kw) | 44.4 | ||||
| Rated velocity (r/min) | 2400 | ||||
| Fuel | Diesel | ||||
| Tires | Front Wheel | 8.3-20 | |||
| Rear Wheel | 12.4-28 | ||||
| Clutch | Dual-phase clutch | ||||
| Steering | Hydraulic steering | ||||
| Transmission Kind | 12+twelve shift | ||||
| Suspension Type | 3-point hyperlinks | ||||
| PTO | Type and Rev | Semi-impartial Type 720r/m or 540/720r/m | |||
| Spline Dimension | I38 Rectangle Spline with 8 teeth | ||||
TZ-8 Entrance Stop Loader with 4 – in – 1 Bucket Specs:
| Design | TZ-8 |
| Bucket potential(m3) | .forty three |
| Rated Load(Kg) | 360 |
| Total dimensions(mm) | 4900×1740×1296 |
| Max. dump peak(mm) | 2200 |
| Max. dump distance(mm) | 960 |
| Bucket rollback angle (degree) | forty two |
| Max. unloading angle (diploma) | forty six |
| Max. scraping depth(mm) | 160 |
| Lifting time to pivot pin(s) | 8 |
| Descending time(s) | four |
| Suggested Tractor(hp) | 50-70 |
LW-8 Backhoe Requirements:
| Design | LW-eight |
| Bucket Potential(mthree) | .048 |
| Bucket Vast(mm) | 450 |
| Max.digging depth(mm) | 2640 |
| Max.digging Radius(mm) | 3930 |
| Max.digging Top(mm) | 3510 |
| Discharging Height(mm) | 2000 |
| Max.digging depth(2ft) Flat base(mm) | 2500 |
| Swing Angle(diploma) | 140° |
| Bucket Rotation(degree) | 160° |
| Dipper stick Digging Power(Kg) | one thousand |
| Running stress(Mpa) | 16 |
Packaging & Delivery:
-3 units inside of 1×40’fcl assembled,
-Shipping and delivery time: 30 days following acquiring your deposit
Company Info:
Our support:
Certifications:
FAQ:
The use of original products manufacturer’s (OEM) part figures or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our firm and the outlined substitution areas contained herein are not sponsored, approved, or created by the OEM.
