Due to our wide product range and rich experiences in this industry, we are confident to provide our customers flexible and diversified services.
Overview
Quick Details
- Condition:
-
New
- Warranty:
-
1.5 years
- After Warranty Service:
-
Video technical support
- Local Service Location:
-
Egypt
- Showroom Location:
-
Egypt
- Type:
-
parts
- Brand Name:
-
OEM
- Place of Origin:Zhejiang, China
- Pressure:
-
hydraulic pressure
- Structure:
-
hydraulic system
- Certification:
-
CE
- Weight:
-
≤7.4kg
Our company is located in XiHu HangZhou Zhejiang Province. T
- After-sales Service Provided:
-
Video technical support
Supply Ability
- Supply Ability:
- 500000 Piece/Pieces per Year
Packaging & Delivery
- Packaging Details
- Carton or Plywood case or PALLET
- Port
- NINGBO / SHANGHAI CHINA
-
Lead Time
: -
Quantity(Bags) 1 – 50 >50 Est. Time(days) 15 To be negotiated
Online Customization
| Parameters | Type | |||||||||||
| BPB1,BPB2,BPB3,BPB5 | BPB1,BPB3,BPB5 | |||||||||||
| Displacement | mL/r | 50 | 63 | 80 | 100 | 125 | 160 | 200 | 250 | 280 | 315 | 400 |
| Rated Flow | L/min | 5 | 6 | 8 | 10 | 12.5 | 16 | 20 | 25 | 28 | 31.5 | 40 |
| Max. Input Pressure | bar | 175 | ||||||||||
| Max.Cont.Pressure in Line T | bar | 25 | ||||||||||
| Power Steering Torque | N.m | 1.6~2.4 | ||||||||||
| Max.Manual Steering Torque | N.m | 130 | ||||||||||
| Dimension L | mm | 130 | 132 | 133 | 136 | 139 | 144 | 149 | 155 | 160 | 165 | 175 |
| Weight | kg | 5.8 | 5.9 | 6 | 6.1 | 6.2 | 6.4 | 6.5 | 6.7 | 7 | 7.2 | 7.4 |
The rangeMaintenance Maintenance on these units is straight forward and like all moving parts these need their fair share of grease and should be greased regularly as these components work very hard and are subject to all that nature can provide for wear and tear. Good grease is essential here; put grease in until you see the old grease oozing out. Go easy on the “U” joints so you don’t blow the seals. Short bursts of a low pressured air grease gun or even better a hand pump gun will do the job and should be done based on hourly use. At least once a season the primary and secondary shafts should be separated. All debris and any rust should be cleaned off. Examine thoroughly for any signs of stress and apply a liberal amount of grease. In addition to this, both the PTO yoke holes need grease inside of them at least once a year along with the yoke lock pin. covers: torque ratings up to 4700Nm continuous torque ratings up to 7800Nm peak (12,800Nm maximum emergency stop torque) input speed 6000 maximum backlash down to 0.5 arc-min solid, hollow and robot flange output shaft options
