We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
High-Quality Electric Chain Hoi EPT for Crane Use
A chain hoi EPT is a pretty simple device considering a large amount of weight such a tool can lift. Chain hoists are made from durable, high-grade steel to ensure safety and reliability when lifting a couple of tons of heavy loads. Manual chain hoi EPT can be separated into three different parts categories: lifting chains, lifting mechanism, and hooks.
Chain hoi EPT has got two chain loops – hand chain and lifting chain. The hand chain sits on a wheel located in the lifting mechanism, it needs to be pulled by hand in order to lift a load. The wheel inside the lifting mechanism has got special pockets that allow the hand chain to move the wheel. Lifting chains also loops the lifting mechanism and lifts or lowers a load. At the end of the chain there is a grab hook, where you can attach lifting chains or slings, a load leveler or load itself. There is also a hook on the top of the chain hoists housing. This hook is used to attach the hoi EPT to a ceiling mount, trolley system or EPT construction that can withstand the weight a hoi EPT will lift. Mo EPT chain hoists have swivel hooks, meaning that they can be turned 360 degrees around to allow for easier mounting. The lifting mechanism consists of a cog, axle, drive shaft, gears and sprockets. There is also a chain stopper or brake on mo EPT chain hoists that prevents load from lowering under a load.
How a manual chain hoi EPT works
The physics behind a chain hoi EPT are very simple and have been used for lifting heavy objects for a long time. Chain hoi EPT uses a mechanical advantage to transform small force over a long distance to large force over a short distance, this is possible by using multiple larger and smaller gears in the chain hoi EPT mechanism.
To lift a load, chain hoi EPT operator needs to pull down the hand chain, this turns the cog and axle which goes trough the lifting mechanism. Inside the lifting mechanism are multiple gears which increase the mechanical work applied when pulling the hand chain for dozen times using gear ratio, allowing to easily lift loads with multiple ton capacity.
So when the hand chain is pulled, the cog which is rotated by the hand chain turns the drive shaft and gears which turn the load chain sprocket, this also rotates the load chain that is looped over the load chain sprocket and lifts a load. Larger gears move slower than smaller gears, but create more force, this is why chain hoi EPT lifts load very slowly when compared to a hydraulic hoist. At the end of the lifting chain is a grab hook, which allows to easily attach and detach a load. Also, mo EPT chain hoi EPT lifting mechanisms have a ratchet or braking system that prevents the load from slipping back, but allows to lower a load by pulling the EPT side of the hand chain.
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.